Contact Info

High Vacuum Aluminum Brazing Furnace

Introduction

  • High Vacuum Aluminum Brazing Furnace

    High vacuum aluminum brazing furnace is applied for vacuum brazing of 
    material like heat exchanger,air evaporator,condenser,radar grid antenna,
    wave-guide tube,etc.

Technical Feature
1.The aluminum brazing tube furnace structure is horizontal,single chamber 
and loading horizontally.

2.The furnace hearth consists of several zones,wide nickle-chromium alloy 
heater and multiple layer stainless steel heat 
steel heat insulation,which has a good temperature uniformity.

3.The vacuum system inlet is configured with gas condensate steering device 
and filter collection device,preventing welding vapor polluting the vacuum pump.

4.Unique rear insulation technology assures larger radiation area and better
 insulation performance.
 
Optional configuration of High Vacuum Aluminum Brazing Furnace

1.Furnace door type:on-line,vertically up and down,rotating

2.Vacuum pump and gauge:foreign brand/high-quality Chinese brand

3.PLC:OMRON/Siemens/Mitsubishi

4.Temperature controller:SHIMADEN/EUROTHERM/Honeywell

5.Thermocouple:style,K type.N type

6.Record:Paperless recorder/paper recorder

7.HMI:Simulation screen/Touch screen

8.Electric components:High-quality domestic brand/Schneider/Siemen
Spec\Model VAB-446S VAB-557S VAB-6694S VAB-7711S VAB-8812S VAB-9915S VAB-121230S
Effective hot zone
 size W*H*L(mm)
400*400*600 500*500*700 600*600*900 700*700*1100 800*800*1200 900*900*1500 1200*1200*3000
Load Capacity(kg) 200 300 400 800 1000 1200 3000
Heating Power(kw) 45 75 90 180 210 300 660
Max.Temperature
(℃)
700 700 700 700 700 700 700
Temperature 
Uniformity(℃)
±3 ±3 ±3 ±3 ±3 ±3 ±3
Vacuum degree(Pa) 8*10-4 8*10-4 8*10-4 8*10-4 8*10-4 8*10-4 8*10-4
Pressure Increase
 Rate(Pa/h)
≤0.26 ≤0.26 ≤0.26 ≤0.26 ≤0.26 ≤0.26 ≤0.26
≤0.65 ≤0.65 ≤0.65 ≤0.65 ≤0.65 ≤0.65 ≤0.65

Inquire Now

  • Name
  • Tel
  • Company Name
  • Email*
  • Country
  • Content*

More Products